304 Grade Stainless Steel (1.4301 to EN 10088) F 316L Grade Stainless Steel (1.4404 to EN 10088) Material:Austenitic stainless steel. 17% Cr. / 11% Ni. / 2% Mo. Tensile Strength N/mm²:530 Minimum. 0.2% Proof stress N/mm:240 Minimum. Elongation %:40 Minimum. Finishes:natural or electro-chemical polish.
AISI 316, AISI 316L, 1.4404, 1.4401 - stainless steel1.4404, 1.4401, AISI 316/L - application and specification. Austenitic stainless steel is resistant to intergranular corrosion, used mainly in environments containing harmful chlorides, acids and urea. 316/316L is the basic grade from the CrNiMo group with Molybdenum, the addition of which significantly increases the resistance to pitting and crevice corrosion of steel by 2-3 times.
Consequently finished steel products are often offered to the market dual certified to both grade designations as they can then be used for fabrications specifying either grade, within a particular standard. For example for coil, sheet or plate. 304 Types. BS EN 10088-2 1.4301 / 1.4307 to the European standard.
EN 1.4436 (X3CrNiMo17-13-3) Stainless Steel ::EN 1.4436 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. Cited properties are appropriate for the solution annealed (AT) condition. 1.4436 is the EN numeric designation for this material. X3CrNiMo17-13-3
EN 1.4436 / AISI 316L - AcerinoxUncollapse/collapse menu Stainless Steel Applications. Stainless Steel Applications. Edificación y Construcción; Catering y Electrodomésticos Compartir en Google + Compartir en LinkedIn; Compartir en Pinterest; EN 1.4436 / AISI 316L. Euronorm Nom. AISI / ASTM / UNS; 1.4436:X3CrNiMo17-13-3:316L:Chemical composition. Grades C Si Mn P S
EN 10088-1:2005 Stainless steels. List of stainless steels COMPARE GRADES EN 10088-2:2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes COMPARE GRADES EN 10088-3:2005 Stainless steels.
EN 10088-1 Physical Properties of Stainless SteelBS EN 10088-1 has values shown as averages between 20 and 100, 200,300,400 and 500 C, depending on the steel 'family' involved. The units are ' 10-6 x K-1 '. This represents the increase (or decrease) in length that a 1 metre length of material will expand (or contract) if the temperature is changed by 1 degree Kelvin (which can be taken as 1
EN 10088-3 Chemical Composition Stainless SteelEN 10088-3 Chemical Composition Stainless Steel. EN 10088-3 is the material standard for stainless steel semi-finished products, bars, rods and sections for general purposes. Ferritic, martensitic, precipitation hardening, austenitic and austenitic-ferritic duplex grades are included. The chemical composition of all the grades of stainless steel covered in the standard are listed.
Equivalent grades of stainless steel. TYPE UNS AISI EN Name EN Number Sub Class Type; 3CR12:S41003-X2CrNi12:1.4003:Utility Ferritics
Stainless Steel EN Standards for Cold Rolledreplaced by 1.4301 EN 10088-2 states that Class A thickness tolerances shall normally be produced Surface Finish Standards have been extended and some changed Material Certification Where multi-certification is required, a combination of EN10088-2, EN10029 or 10051 will appear together with the appropriate ASTM Standards.
Stainless Steel EN Standards for PlateStainless Steel EN Standards for Plate abc replaced by 1.4301 EN 10088-2 states that Class A thickness tolerances shall normally be produced 1.4436 316S33 316 58J 0.05 17 11 2.5 . 220-270 500-730 40 1.4438 317S12 317L 0.030x 18 13 3 . 220-270 520-720 35
Finishes According to BS EN 10088-2 / 10028-7 *NOTE:Special finishes indicate hot rolled (1) and cold rolled (2) sheets, e.g.:Ground polished hot rolled sheets + 1G / Ground polished cold rolled sheets = 2G For more information on stainless steel finishes please refer to the AAlco technical datasheet on this subject.
Stainless Steel - General Information - EN Standards for Finishes According to BS EN 10088-2 / 10028-7 *NOTE:Special finishes indicate hot rolled (1) and cold rolled (2) sheets, e.g.:Ground polished hot rolled sheets + 1G / Ground polished cold rolled sheets = 2G For more information on stainless steel finishes please refer to the AAlco technical datasheet on this subject.
Stainless Steel EN 1.4436 AISI 316 X3CrNiMo17-13-3 UNS Description :1.4436 / AISI 316 is an austenitic chromium-nickel-molybdenum stainless steel. Special properties :1.4436 is a higher alloyed version of 1.4401 an is specified when the corrosion resistance of 1.4401 is no longer considered to be sufficient.
Stainless Steel Grades Datasheets Introduction. Datasheets for Flat Products Based on EN 10088-2. The table below contains all grades listed in EN 10088-2. In addition, there are some grades not in the current edition but which are expected to be in future editions. 1.4429:316LN:X3CrNiMo17-13-3:1.4436:316:316S33:X2CrNiMo18-14-3:1
Stainless Steel:Tables of Technical PropertiesCare was taken to include as much information as possible about stainless steel flat products used throughout Europe, for the informatio n of the user: Chemical and physical properties are in accordance with EN 10088-1:2005 Mechanical properties are in accordanc e with EN 10088-2:2005, except for he at resisting grad es (EN 100 95:1999)
Stainless steelsEN 10088-1:2005. It supersedes BS EN 10088-1:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/30, Stainless Steels, which has the responsibility to:This second edition of BS EN 10088-1 is a revised reference document containing chemical analysis and physical property data for 160 stainless
The steel is modified for machining and has very good corrosion resistance. The steel is often used for details within building and construction, process industry. The steel grade 1.4404 (also called ASTM 316/ 316L and SS2348) is a stainless acid-proof steel which is EN 10088-2 Chemical Composition Stainless Steel24 rows · EN 10088-2 is the material standard for stainless steel sheet, plate and strip for